1/2" X 7' Three Strand Double Mooring Pendant 100% Nylon Rope with 3 Stainless Steel Thimbles. For Pontoon Boats Made in USA.

I have a huge concrete block already in about 7 feet of lake water that a former owner of the camp used to moor his pontoon boat. I am purchasing a new 21 foot pontoon boat this summer. Do you have basic step by step instructions and hardware for mooring a 21' pontoon boat in about 7 feet of water? Thank you, Joe

Thank you for your question,
Usually for a pontoon boat of 21' the 1/2" double mooring line with 3 shackle and e thimbles is a right size.
But depending the of the cleats or attachment of your pontoon boat.
For give to you more help, I need to know how is your mooring  setup, do you have a ball attached to the chain of your mooring?
For help you, please email to info@dbropes.com a sketch with the mooring setup, as well a picture of your bow or the brand of your pontoon.
Thank you
Dani
dbRopes

Can the two ss thimbles be deleted from the 3 stranded double mooring pendant and just have the mooring loops instead?

Thank you for your question.
I believe that what you are looking for is lister here:https://dbropes.com/collections/1-2-double-mooring-pendant-100-nylon-rope-with-stainless-steel-thimble
Please let me know if you need other size.
Thank you!
Dani dbRopes

I have a 2012 18' Tracker Bass Buggy Pontoon boat. What do you recommend to tie to a Lake Buoy. I need to run ropes from each pontoon and connect to a single line to buoy. Currently is three ropes connected with shackles with the line to the buoy having a snubber. There is another line that ties to chain below the buoy from under the boat between the pontoons.

The 1/2" x 7' double mooring for pontoon will work very well for your boat. Not needed the extra snubber due the high stretching; up 30%becouse the rope is made with high quality100% nylon.
An extra line on the middle is always good option as backup.
Please let me know if you need more help.
Thank you

Hello Dani! Please tell me, what size shackle is most appropriate to fit the thimble?

Thank you for your question.
3/8" in SS or 1/2" galvanized.
Please let me know if you need more help.
Cheers!

how can I keep my three strand double mooring line from my pontoon boat from wrapping around the chain attached to the mooring buoy ?

Hello,
One of the best way is installing a pool noodle (few dollars) secured by zip tied.
As well it is recommended to attach the line to the chain below the buoy, not on top of the buoy.
Please let me know if you need more help.
Thanks
Dani
dbRopes
Thanks.
As well

Can you make the 1/2" X 7' Three Strand Double Mooring Pendant 100% Nylon Rope with 3 Stainless Steel Thimbles with a float attached to the 7 foot ends so the ropes float in the water?

Thank you for your question.
What I can do is to put over the rope 2ft of pool noodle from the thimble on the buoy end line, t will work very well.
Please let me know if it is good for you.
Thank you.
Dani
dbRopes

1 have a 24 ft 2022 Bartletta pontoon boat that’s 8 1/2 ft wide would this work for anchoring?

Hi, thank you for your interest.
For your boat I recommend 10'.
Here the link:
https://dbropes.com/products/custom-1-2-x-10-three-strand-double-mooring-pendant-100-nylon-rope-with-3-stainless-steel-thimble-tensile-strength-6400-lbs-made-in-usa-free-shipping?_pos=2&_sid=2be0e435e&_ss=r
Please let me know if you need more help.
Thank you!
Dani
dbRopes