5/8" X 12' Three Strand Anchor Snubber Line Bridle with Galvanized or SS Shackle

I have a 2008 Tiara 3800 Open (approx 22,500 lbs dry disp). What length, diameter is optimum? Assume the material provides some stretch?

Thanks for your question.
For your boat the 5/8" will be fine.
The snubber length should be approximately 2 1/2 time the freeboard of your boat.
But please could you please tell me the size of your anchor chain? 5/16" or 3/4"?
Thanks.
Dani

I have a Carver 466 It is 48' long and weights 40,000 lbs + free board is about 10' what size snubber do I need

Hi, thanks for your question,
3/4" will be good for your boat and the length around 2 1/2 times the freeboard of your boat, It means 25'
Please let me know if you need more help.
Thanks
Dani
dbRopes

My boat has 5 ft of freeboard. Should I get the 12 or 15 foot snubber line?

Thank you for your question,
12 ' snubber will be fine, but if your boat is very heavy, 15' will be better.
Please let me know which boat do you have and I can tell you the right size.
Thank you again
Dani
dbRopes

I have a 75 foot hatteras motor yacht. What size line and length should I get? Can the optional chain hook be attached to the shackle?

Thank you for your question,
The 75' yacth need 1" snubber, the length about 2 1/2 or 3 times the freeboard.
And yes the chain hook can be attached to the shackle.
If you are interest, please contact us by email to info@dbropes.com, with the dimension of your anchor chain and the dimension of your freeboard, as well the dimension of the  soft eyes that you can adapt to your cleats, we can make custom snubber for your yacth.
Thanks you again

What chain hook would you order for 5/16" chain?

Thank you for your question.
5/16" grab hook.
Here the link:
https://dbropes.com/collections/hooks/products/high-test-eye-grab-hook?variant=33033552199785
You have the option with Galvanized or SS material.
Thanks a lot

Do you make this 5/8 snubber in 10' lenght?

Thanks for your request.
Yes we can make the anchor snubber with any size.
Please send an email to info@dbropes.com with your request and we will email you back with the price and the listing link were you can purchase online
Thanks
Dbropes

Is this anchor snubber good for my 38' sailboat?

Yes, our 5/8" snubbers are good for boats from 35 ft to 45 ft. THANK YOU. dbRopes

I have a 420 sea ray sedan bridge 30,000+ fully loaded wondering what size bridle 5/16 chain?

Thank you for your question.

For your boat I recommend 5/8" x 15' snubber.

The snubber come with the shackle, but you need the 5/16" hook for your chain, we sold it separately.  As well we recommend add chafe guard on each leg.

Please, let me know if you need more help.

Thank you.

Dani

dbRopes

Where is the 5/8" X 12' Three Strand Anchor Snubber Line Bridle with Galvanized Shackle manufactured?

It is manufactured from us in New York. Made in USA.

Good morning. I bought a snubber for you but had to guess my size since the boat was 3000 miles from me. I was way off. It has not been used. Would you consider an exchange for a new one built to the size I need?

Thanks for your question, yes you can please send an email to info@dbropes.com requesting tge return or exchange with your order number.
Thank you.

Hello, I have a Beneteau SV LENGTH OVERALL 35’4’’. Which snubber do you recommend? Thanks. Sasha Nunes

Thanks for your question.
5/8" x 12' snubber will be perfect for your boat.
Please let me know if you need more help.
Thanks again!
Dani
dbRopes

Hi, I have a 5 ton 32' islander sailboat. I am set up with a 33lb plow anchor with 90ft of chain attached to 250' of 5/8" rode. I need a bridal that I can use both on my chain and the rode when in deeper water. Any solution?. Thanks. Sincerely, Rick SV Anchored Faith IX

Thank you for your question.
You can attach to the chain and to the rode rope with this solution:
https://dbropes.com/collections/customs-ordered-recently/products/prusik-knot-rope-snubber
Please let me know if you need more help.
Thanks.
Dani
dbRopes

1985 44 Defever Offshore I need an anchor snubber, what do you suggest?

Thank you for your question.
As the displacement of your boat is around 44000 Lb., I recommend 3/4"  x 20'  snubber. As well I recommend add chafe guard on each leg.
Is the diameter of your anchor chain 3/8"?
Please let me know.
Thanks
Dani
dbRopes

I have a 2001 Bavaria Ocean 40. 40’ sailboat. 21143 lbs fully equipped yacht- ready for sailing with crew. 5’ of freeboard. The chain on my windlass is 5/16. What size and what length should I get for my anchor snubber? If I want the have chafe protections on the eye ends of the ropes is that possible? What’s the delay after ordering for a delivery in Fort Pierce, Florida?

Thanks for your question.
For your boat I recommend 5/8" x 12' snubber.
About the chafe guard on each leg we have listed as option,  just you can order the snubber and the chafe guards, we will put in before to splice. If you need a 5/16" hook we have listed it as well.
About the timing, we should ship the next day after receive the order. To Florida it should take 2-3 business days to be delivered.
Please let me know if you need more help.
Thank you!
Dani
dbRopes

Is this capable of handling a 30000 pound boat

Thank you for your question.
Yes, it should do the job as anchor snubber.
But for the right size, please, let me know which boat do you have and the diameter of your chain.
Thanks again
Dani

I have a 2001 Bayliner 3988 and I have removed the bow pulpit 12’ or 15’

Thank you for your question.
As the freeboard of your boat is around 6', . I recommend 5/8" x 15' snubber.
Please let me know if you need more help.
Thanks.
Dani
dbRopes

I am purchasing a 38’ Sabre with a 22lb plow anchor 50’ of chain and then rope. How do I attach a bridle to the rope to help keep the strain off of the windless and can you recommend the bridle I need. Is this anchor large enough for this boat-21500 lbs dry. Thanks dan

Thank you for your question,
For your boat I recommend 5/8"x15' anchor snubber.
For attaching the snubber to the anchor rope, I recommend an addicional small rope attached to the snubber shackle on one end, and to the rope with a prusik knot to the anchor rope rode, it is very easy to attach end remove it.
We can make it for you, please replay this email or send another email to info@dbropes.com, I can send you pictures about the attachment.
Thank you.
Dani
dbRopes

Can I get a 1/2" x 4' mooring pendant with stainless steel thimble ends and strung with 2 or 3 floats? Thank you Clark

Thank you for your question.
About the mooring pendant 1/2"x4', you can found it here: https://dbropes.com/collections/three-strand-mooring-pendant-100-nylon-rope-with-2-galvanized-or-ss-thimbles/products/12-x-4-three-strand-mooring-pendant-100-nylon-rope-with-2-galvanized-or-ss-thimbles-tensile-strength-6400-lbs-made-in-usa-free-expedited-shipping?variant=21656382242921

Abot the floats, we do not have them, I recommend to add a pool noodle (few dollars), easy to install on the line.
Please let me know if you need more help.
Dani
dbRopes

5/8" X 12' Three Strand Anchor Snubber: I'm interested in this snubber line however I believe I may need a 1/2 x 10ft. I'm also looking for black line vs white. Is that possible? Boat is 40ft with under 4 ft freeboard at the bow and only 18K lbs loaded. I have an all chain windlass with smaller sized chain. (and I don't boat in rough weather)

Thank you for your question.
Unfortunatelly we do not have black rope in stock right now.....Sorry.
About the size, 1/2" is the right size to have the right stretching with the specs of your boat.. With 5/8' will work as well but you lost some elasticity during shocks.
The lenght 10' or 12' do not make much difference, because is better more lenght then less. The 10' lenght is the minimum for you.
You should have 1/4" chain right?
Please let me know if you need more help.
Thanks
Dani
dbRopes

I have a 48 foot Tollycraft that is 35 Gross Tonnage. Which anchor bridal would you recommend? freeboard is I think around 6-7 feet. Thank you. Dave

I have a 1972 Hatteras 53MY. The freeboard is 8'-4". the boat weighs 55,000 pounds & the anchor chain looks to be 3/4" or 5/16". What do I need for a snubber ?

Hi - I have a Beneteau First36.7 (around 7 tons disp.) and would like to know what snubber would suit my boat? Also - do you ship to Australia?

Thank you for your question.
For your boat the 5/8" is the right diameter for the snubber. The length should be 2 -1/2 times the freeboard (the distance from the deck to the waterline).
I think that the freeboard  of your boat is around 6ft. So with 15' length will be fine.
We ship to Australia too but it is not free outside the USA.
Please let me know if you need more help.
Thank you.
Dani
dbRopes

I have a 36.5 foot American Tug. which bridle should I get?

Thank you for your question.
As your boat is around 20000  lb. of displavement, I recoimmend 5/8" and for your freeboard 15' lenght.
The 1/2" x 15 anchor snibber will work well too in normal wheater conditions, but will be better if I know the diameter of your anchor chain.
Please let me know.
Thanks again
Dani
dbRopes