3 Strand Mooring Pendant 100% Nylon Rope Premium with Heavy Duty Galvanized Thimble. (Select size)

What tensile strength do I need for a 20ft center console scout for a pendant line? Same question for the safety line?

Thank you for your question.
For mooring your boat I recommend two separate lines of 1/2"  (6400 lb. tensile strenght).
Please see our recommendation guide here:
https://dbropes.com/blogs/dbropes-recommend/mooring-line-size
About the safety lines, I can not answer because I do not understand what it means.
Thank you

Can a 5/8" x 15 ft. come with thimble on one end and a snap hook on the other (permanently afixed) and if so how much would it cost?

ThAnk you for your interest,
The price is the same for the line, you just can purchase the hook here, https://dbropes.com/collections/hooks and we tack care for splice the hook permanently.
Thanks again.

Can I get a 5/8 x 6 pendant with a thimble at both ends. If so please quote a price. Thank you

Thank you for your interest,
The price is $43.90 with galvanized thimbles and $ 52.90 with SS thimbles, here the link:
https://dbropes.com/collections/5-8-three-strand-mooring-pendant-100-nylon-rope-with-2-galvanized-or-ss-thimbles/products/58-x-6-three-strand-mooring-pendant-100-nylon-rope-with-2-thimbles-tensile-strength-10400-lbs-made-in-usa-free-expedited-shipping?variant=21656375820393
Free shipping in the USA.
Thanks

for a 15 foot pendant, 5/5 rope, WHAT is the length of the loop on the boat side?

Thank you for your question,
The lenght of the eye (loop) is 12 inch, but if you need other size we can make any size without problem, just email us with your request.
Thanks
Dani
dbRopes

What is the diameter that I need for Catalina 27 sailboat?

5/8" is perfect for your boat. THANK YOU

Do you sell polyester rope for moorings, with custom lenghts, with loops and thimbles etc? Or just nylon? In reading I hear that polyester is best, won't stretch, good UV resist, long life. Why should I buy nylon?

Thank you for your questions.

We do not make polyester rope only 100% nylon.

The nylon is high recommended just for mooring boat, due his high stretching, up 40%.

Elasticity is very important specially dure hurricane or bad weather. The polyester has other characteristics a little better than nylon, but very low stretching, it means that polyester can't dissipate the load like the nylon, so a big load received can dammage the boat like cleats... deck and boat structures (for example like a car without the shocks installed).

I hope the explanation can help you. But let me know if you need more help.

Thank you

Dani

Do you do inch and a quarter pendants? Nylon 3 strand

Thank you for your question, we can make any size.

For custom orders pkease send an email with all measurement to info@dbropes.com

Thank you

Hi to whoever it may concern My name is Scott I’m looking for 5/8 by 60’ dock line with stainless steel thimble on one end 2 pieces Can you make that of good quality say 10 years? And price? Thank you

Thank you for your interest.

Please,, for custom orders send an email to info@dbropes.com with your request.

Thank you again

dbRopes

I am in need of a bridle for a 52 Sea Ray Sedan Bridge. What length for each leg of 3/4 inch do you recommend?

Thank you for your question,

If you need the lines as permanent mooring lines, I recommend 2 lines of 1" x 15'.

If you need the lines as anchor snubber or not permanent mooring, I recommend 3/4" x 15'.

Please, let me know if you need more help.

Thank you!

When will the 3/8" x 6ft" be in stock to order?

Thank you for your question.
It is in stock right now.
Thanks

When will you have these back in stock? Looking for 3/8" three strand 6' with thimble mooring line.

Thank you for your question.
The 3/8" is just in stock again now.
Please let me know if you have any problem for purchasing.
Thank you.
Dani
dbRopes

What sort of hook/clip is used to attach the thimble to the mooring ball?

Thank you for your question.
The best way to attach the mooring lines to the mooring buoy is with shackle.
The shackle size depends of the rope size.
Please let me know if you need more help.
Thank you!

What is the advantage of a stainless steel thimble over a galvanized thimble? What diameter mooring rope do you recommend for a 22.5 ft boat that weighs 4,000 lbs. The boat will be moored in Lake Champlain and exposed to rough water and wind. If I order a custom line with thimble's on both ends can you put swim noodles or other type floats on the line? Thanks

Thank you for your questions.
The SS thimble is more clean and durable then the galvanized.
For the best balance, for your boat I recommend two lines (port and starboard) of 1/2”with splice soft eye on one end and thimble on the other end to attach around the cleats from the bow deck. it is not recommended to attach the boat from the front ring, it is just designed for towing and secure the boat to the trailer NOT for permanent mooring.
The length of the lines should be around 2 1/2 times the freeboard of your boat.
We do not have float but yes swivel.
If you need custom lines please send an email to info@dbropes.com with the detail of your request, so we will do the best.
Please, let me know if you need more help. thanks
Dani

What size and length of line do you recommend for a flicka 20?

Hi, thank you for your question.
For your sailboat I recommend two mooring lines of 1/2" x 8' (one for port side and the other for starboard side).
Please, let me know if you need more help.
Thank you!
Dani
dbRopes

I need an extra Mooring line for a 28 ft sailboat in the Delaware River with some current and wave action. I believe I always used 3/4-in line but I need it to be 75 ft with a heavy duty galvanized thimble.

Thank you for your question.
We can make it, but for custom orders please send a request to info@dbropes.com
Thank you!
Dani.
dbropes.com

Want a15’ 1/2 mooring line with a thimble at each end

Thank you for your question.
Not sure to understand if you would like 15' 1/2 ft with thimbles on both end or you would like 15' of 1/2" line with HD thimbles on each end.
For custom order please send an email with your request to info@dbropes.com.
Thank you!

Dani