Colgante de amarre de 3 hebras 100% cuerda de nailon de primera calidad con dedal galvanizado de alta resistencia. (Selecciona el tamaño)

dbropes

  • $39.00
  • Ahorra $-39
Los gastos de envío se calculan en la pantalla de pagos.

Ask a Question
ENVÍO GRATIS
  • ★ Cuerda 100% nailon de alta calidad fabricada en EE. UU. Especificaciones militares: MIL-R-17343D
  • ★ Resistente a la abrasión, durabilidad, manejo, carga de impacto, moho y putrefacción
  • ★ Empalmado profesionalmente (empalme de 7 pliegues), dedal galvanizado de alta resistencia en el extremo de la boya, ojal blando en el extremo del bote (12").
  • ★ Resistencia a la tracción: 3/8"=3700 lbs.; 1/2"=6400 lbs.; 5/8"=10400 libras; 3/4"=13800 libras; 1"=25000 libras.
  • ★ Sorbo rápido (entrega de 3 a 5 días)

  • Nuestro colgante de amarre de alta calidad 100% cuerda de nailon tiene tres características que lo hacen ideal para línea de dársena y línea de amarre. 100% La cuerda de nailon es increíblemente fuerte, es muy elástica y resiste el efectos nocivos de la luz solar mejor que cualquiera de los costosos sintéticos de nombre elegante. El valor de resistencia de las cuerdas 100% nailon es evidente, pero los beneficios de la elasticidad pueden no ser tan obvios. Cuando su barco choca contra una línea de muelle / línea de amarre inflexible, el carga en la línea va de cero al máximo en el instante en que la línea viene tenso. La consecuencia probable es una línea quebrada, no muy diferente de cómo podría romper un trozo de hilo con un tirón. Incluso si la cuerda es fuerte lo suficiente como para no romperse, está martillando tacos y bitas con cada oleada. La cuerda 100% nailon no se tensa repentinamente, sino que disipa la carga extensión. Es como la diferencia entre golpear el volante o golpear la bolsa de aire. En cuanto a la resistencia de la cuerda 100% nylon a daño ultravioleta, líneas de amarre, particularmente líneas de muelle permanentes, vivir en el sol. Las líneas dbRopesTM disfrutan de una vida mucho más larga que otras líneas en ese entorno.

    • What tensile strength do I need for a 20ft center console scout for a pendant line? Same question for the safety line?

      Thank you for your question.
      For mooring your boat I recommend two separate lines of 1/2"  (6400 lb. tensile strenght).
      Please see our recommendation guide here:
      https://dbropes.com/blogs/dbropes-recommend/mooring-line-size
      About the safety lines, I can not answer because I do not understand what it means.
      Thank you

    • Can a 5/8" x 15 ft. come with thimble on one end and a snap hook on the other (permanently afixed) and if so how much would it cost?

      ThAnk you for your interest,
      The price is the same for the line, you just can purchase the hook here, https://dbropes.com/collections/hooks and we tack care for splice the hook permanently.
      Thanks again.

    • Can I get a 5/8 x 6 pendant with a thimble at both ends. If so please quote a price. Thank you

      Thank you for your interest,
      The price is $43.90 with galvanized thimbles and $ 52.90 with SS thimbles, here the link:
      https://dbropes.com/collections/5-8-three-strand-mooring-pendant-100-nylon-rope-with-2-galvanized-or-ss-thimbles/products/58-x-6-three-strand-mooring-pendant-100-nylon-rope-with-2-thimbles-tensile-strength-10400-lbs-made-in-usa-free-expedited-shipping?variant=21656375820393
      Free shipping in the USA.
      Thanks

    • for a 15 foot pendant, 5/5 rope, WHAT is the length of the loop on the boat side?

      Thank you for your question,
      The lenght of the eye (loop) is 12 inch, but if you need other size we can make any size without problem, just email us with your request.
      Thanks
      Dani
      dbRopes

    • What is the diameter that I need for Catalina 27 sailboat?

      5/8" is perfect for your boat. THANK YOU

    • What size and length of line do you recommend for a flicka 20?

      Hi, thank you for your question.
      For your sailboat I recommend two mooring lines of 1/2" x 8' (one for port side and the other for starboard side).
      Please, let me know if you need more help.
      Thank you!
      Dani
      dbRopes

    • I need an extra Mooring line for a 28 ft sailboat in the Delaware River with some current and wave action. I believe I always used 3/4-in line but I need it to be 75 ft with a heavy duty galvanized thimble.

      Thank you for your question.
      We can make it, but for custom orders please send a request to info@dbropes.com
      Thank you!
      Dani.
      dbropes.com

    • Want a15’ 1/2 mooring line with a thimble at each end

      Thank you for your question.
      Not sure to understand if you would like 15' 1/2 ft with thimbles on both end or you would like 15' of 1/2" line with HD thimbles on each end.
      For custom order please send an email with your request to info@dbropes.com.
      Thank you!

      Dani